FW450 3D RC Helicopter H1 Autopilot BNF

$519.99 $494.99

What if we told you, You can Fly a 3D RC Helicopter Like a Champ and even Perform Inverted Flights, Inverted 3D Stunts on your Very First flight?

Start Flying 3D RC Helicopters with confidence.

Learn to fly and Perform 3D Stunts in no time at all


Learning to Fly RC Helicopters is a tough job, and learning to fly 3D RC Helicopters and performing 3D Stunts is even tougher.
Many will simply give up on learning to fly RC 3D Helicopters due to constant failures, crashes and extreme slow progress.

Flying and performing 3D Stunts on RC 3D Helicopters requires months and years of practice.

What if we shown you that even a 6 years old and a 9 year old Kid Flew the 3D RC Helicopter first time ever in their lives and performed 3D Inverted Flight stunts on their very first flight?


What if we told you, You can Fly a 3D RC Helicopter Like a Champ and even Perform Inverted Flights, Inverted 3D Stunts on your Very First flight?


Yes Fly 3D RC Helicopters and learning to fly 3D RC helicopters now becomes as easy as 123 with H1 GPS Autopilot.

FW45o is a 450 size 3D RC helicopter that comes BNF in this combo. To make it ready to fly all you need to do is just get a 9 channel radio, a 4S 2600mAh – 3300mAh battery and Balance charger for your battery. Download and install H1 Assistant software and follow the user manual and videos to install and configure your Autopilot on FW450. Go Out and start flying a 3D RC Helicopter like a champ. Not just fly and learn to fly 3D RC Helicopter in few minuts but also You can fly inverted, perform inverted 3D stunts like backward inverted, inverted Funnels etc, and even cut grass flying 3D Helicopter inverted on your very first flight.

If you can not setup BNF, then get the RTF Combo here:



Features of H1 AutoPilot System:

The H1 helicopter flight control system is the newest state of the Art GPS Autopilot System designed for RC Helicopters. With its built-in floating IMU and double-layer damping sponge, combined with a new generation of control and IMU algorithms, anyone can easily fly RC Helicopters. Even kids can fly a 3D RC Helicopter now and perform 3D Stunts on their very first flight.

The H1 flight control system consists of a main controller (built-in floating IMU, compass and barometer) and a dual-mode GPS module.

This provides a solid GPS lock hover both in Normal and inverted flight and gives beginners peace of mind that they are not going to crash the helicopter. Gives beginners plenty of time to think about their orientation and fly their 3D RC Helicopter with extreme confidence on their very first flight. Should they make a mistake, just leave sticks and Helicopter will come to a solid GPS hover.

H1 System also offers Failsafe modes. If Battery is low, if Helicopter goes out of control range, or any time Pilot flicks the Home Switch, Helicopter will Auto Return to home and land safely.

With One Switch Auto Circle Point of interest and One Switch Auto Figure 8 flight, One Switch Auto Inverted Flight and Normal Flight modes switching, Precise GPS Position in both Normal and Inverted Flight modes you can learn to fly many orientations of 3D RC helicopters just in few minutes. Experiment different flight orientations and fly with total confidence.


Download H1 Assistant Software and Drivers here:

If you want only Autopilot System, you can order here:

If you do not have experience in RC helicopters, we suggest you order RTF Version Here:

Forget about 

  1. Months of tiresome and painful RC helicopter Flight learning process
  2. Weeks of Expensive Flight Simulators practice (Save costs on buying and installing Flight simulators)
  3. Crashes and Repairs (Saves you lots of costs and time)
  4. Failure to learn to fly 3D RC helicopters and Performing 3D Stunts.


Quicker Learning Process starting from your very first 3D RC Helicopter Flight

  1. Build 3D RC Helicopter Flight and Control Confidence from day one
  2. Master many basic and complex Normal and inverted 3D stunts quickly. Backward Flying, Forward and backward funnels, Inverted Hover, Inverted Forward and backward flight, inverted funnels, and even go for Blade scrapping or grass cutting with inverted hover easily.
  3. Learn to fly 3D RC Helicopters like a Champ in few days
  4. Install HD Cameras and FPV Systems and Fly Short range and mid Range FPV with 3D RC Helicopters
  5. Never lose your 3D RC Helicopter again.
  6. Fall in Love with FW450 and H1 Autopilot from Day one 🙂
  7. Impress everyone around you 😀


Key Features of FW450 Helicopter with H1 Autopilot



What do you get when you order FW450 BNF Helicopter:

  1. FW450 Size 3D RC Helicopter with H1 GPS Autopilot installed.

To make it fly you will need (Buy Separately)

  1. A 9 channel Digital Radio Control System and SBUS receiver. (Does not have to be Helicopter System. A normal airplane model configuration is all you need to setup with H1 Autopilot). Click here for a good radio control system:
  2. Check out Newest Radio transmitters and Receivers:
  3. 4S 2600mAh or 3300mAh Lipo Battery and a balance Chareger. Order batteries and Chargers here:


Order Today 🙂 and Start Flying 3D RC Helicopters with confidence.

Learn to fly and Perform 3D Stunts in no time at all. 



Please note: Shipping costs are not included in this cost. As your Order is built and tested, it takes some time after payment. Once your order is ready to be shipped, we will inform you of shipping costs. if you have any questions feel free to drop us a line.