DJI Naza M GPS is a combo that include Multirotor Flight Controller, DJI Naza, and GPS Compass Unit. This is one well tested and well trusted Multirotor flight controller that is designed to deliver supreme flight performance and solid GPS position hold hover together with great failsafe features like low voltage and Auto Return to home and Land.
ADVANCED ATTITUDE STABILIZATION
Advanced mix guidance algorithm and control algorithm, inherits outstanding flight stability of DJI products, provides excellent maneuverability, gives hobbyists wonderful flight experience.
MULTIPLE FLIGHT MODES / INTELLIGENT SWITCHING
INTELLIGENT ORIENTATION CONTROL
LOW VOLTAGE PROTECTION
SAFE MOTOR ARMING
Naza have four ways to start motor,see the following picture:
In any situation start the aircraft (include any motor disarm)Need to perform any of the ways of breaking rod. During the flight, the motor stall, the immediate implementation of any of the breaking lever start, the motor will now return to the rotation, and enhance the safety of the aircraft during the flight.
Immediately Mode: By using this mode, in any control mode, once motors start and throttle stick is over 10%, motors will stop immediately when throttle stick is back under 10% again. In this case, if you push the throttle stick over 10% in 5 seconds after motors stop, motors will re-start .If you don’t push throttle stick after motors start in three seconds, motors will stop automatically.
Intelligent Mode: By using this mode, different control mode has different way of stopping motors. In Manual Mode, only executing CSC can stop motors. In Atti Mode. any one of following four cases will stop motors:
a) You don’t push throttle stick after motors start in three seconds;
b) Executing CSC;
c) Throttle stick under 10%, and after landing 3 seconds.
d) The slope angle of multi-rotor is over 70°, and throttle stick under 10%.
S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel function set in a channel of X2, use only oneservo cable to the S-Bus and X2 can makes installation quick and easy, not easy to make mistakes.
SUPPORTED MULTI-ROTOR TYPES
CAMERA GIMBALS STABILIZATION
The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the helicopter after setting the parameters the first time.